NEWS:

2014-01-03 15.01.00
SQUIRT 2.0 - 100 Mhz !!! 2x SPEED - RST & POST BUS WIRE TUNING ON BOARD

SQUIRT BGA 2.0 100 Mhz
SQUIRT BGA 2.0 100 Mhz

Team squirt360 is back on the scene with an important update of his hardware. SQUIRT 2.0 introduce a more powerfull oscillator 100Mhz, 2x speed then before.
This mean stable boots, short wires and a cheaper solution to archive the best boot timing.
Over this we redesigned the PCB with a new RST and PST pad tuning embedded, no more extra PCB to find the best tuning of these two pads.

This new chip need new bitstreams that will be availables mid next week.

Here the new PINOUT to adapt the old diagrams and manuals (just connect the wires according to the new pinout).
For the support of dual nand products of SQUIRT we will release during january the new bitstreams.

Click here for the new PINOUT SQUIRT BGA 2.0 - 100 Mhz:

http://www.squirt360.com/download/pinout-bga-2.0.pdf


2013-03-22 17.01.00
SQUIRT SPI.EXE RELEASED - POST BUS SNIFFER SQUIRT PROGRAMMER V2

SQUIRT CLONES

SPI.EXE is the first software released that us ethe new 8 Bit Power translator. With this simple EXE we print on the screen the values of X360 POST BUS codes.
The source code for developers will be released soon with more infos about the schematics of our FTDI programmer.

Here you can find the tutorial for POST BUS SNIFFER:
http://www.360squirt.com/downloads/POSTBUS%20TUTORIAL-EN-01.pdf

Here you can find the software for POST BUS SNIFFER:
http://www.360squirt.com/downloads/spi.zip


2013-03-09 17.01.00
SQUIRT PROGRAMMER V2 - 8 Bit power translator on board!

SQUIRT CLONES

Dear Users,

we are happy to introduce you "SQUIRT PROGRAMMER V2"
This new version add a simple but very useful IC on board, an 8BIT Power translator from 3.7V to 1.8V.
This simple IC open the door to connect the SQUIRT FTDI interface to any device.
The release date: End of march 2013
Cost? About 5 eur more then standard version

What are the possible application?
- Connect to the POST BUS of x360 for debug and RGH optimization (like CR3 PRO) (blakcat Autogg is looking to add nice features !!!)
- Connect to any device 1.8V and have an 8 BIT communication port

The Squirt programmer now is one of the cheaper and complete universal USB "bridge" . All can develop own application and communicate in many different ways from PC to another device.
We will post here in few hours the new schematics for the developers.
Please follow this post
http://forum.dayton360mods.com/showthread.php?926-New-squirt-programmer-v2

We remember the old post where you can find all infos how to manage and program software to use FTDI USB chip on squirt programmer here:
http://forum.dayton360mods.com/showthread.php?286-Ftdi-developers-searching-post-bus-analyzer-remote-control


2013-01-08 17.01.00
COM MONITOR - SQUIRT PROGRAMMER


blakcat AutoGG: New Addon - COM Monitor with Data Autodetection.

Only one extra wire using Squirter. ;)

COM-Monitor Tutorial:
* We need to install a Com Port Reader. In the picture section you can see how you can use Squirter with only 2 wires soldered.

http://imageshack.us/a/img802/306/autoggcom.jpg

* Click NandXell - Com Monitor
* We will get a menu to config Com port.
* Boot Xell and you will see the Log of Xell .It will detect the CpuKey, Ip and Ldv of console.
* If we had loaded console Dump, it will decrypt it.

http://www.homebrew-connection.org/autogg-0-8-6-the-rghjtag-aio-program-is-updated/
http://www.logic-sunrise.com/news-586353-autogg-086-monitor-com-avec-squirt-programmer.html
http://www.elotrolado.net/hilo_autogg-0-8-6-by-blakcat-tutorial-exploit-rgh-jtag_1688613


2012-12-12 17.01.00
QSB DUAL NAND - NEW INSTALLING PROCEDURE & QSB CORONA

SQUIRT CLONES

We found in the past days SQUIRT CLONES in the market, this is a demonstration of how our product is appreciated in the market... chinese like to copy us :)
We recieved today a SQUIRT CLONE and here we teach you how to recognize the clones:
1- The first simple way to discovery it is check if GND pad of the LPT pads (red dot on picture) is connected to GND. Like you know on the ORIGINAL squir there is a bug on the PCB and this pad is not connect to GND.
2- The silkscreen of the CLONE is different then SQUIRT ORIGINAL.

The test results on the SQUIRT clone show two big problems:
1- The OSCILLATOR tollerance is more then 10%, this mean that SQUIRT CLONES cause more problems of stability of your RGH installation
2- The POWER REGULATOR also are bad quality second hands... this cause also a problem of stability of your RGH installation.

Be aware from distributors / resellers that cheat you by offering CLONES instead original, this is a fraud.
If you see any of our distributors selling clones please report us, we will remove them from the lis

Thanks for now
SQUIRT TEAM


2012-08-28 17.01.00
QSB DUAL NAND - NEW INSTALLING PROCEDURE & QSB CORONA

SQUIRT QSB CORONA PROTOTYPE

Dear customers,
In the picture you can see the prototype pcb board of QSB DUAL NAND "CORONA", the easy quick solder solution for DUAL NAND on CORONA.
The boards will be ready in the next 10 days for distributions, PREORDERS are opened.

There is also a nice update on QSB INSTALLING procedure (for all board versions).
Preamble:
The SMC (southbridge) is a chip that start to work when you plug the power cable to X360. SMC manage the basic hardware and it has a software that start to load the basic functions of the X360 (like the BIOS for the PC).
The Southbridge load this software from the NAND.
SQUIRT QSB DUAL NAND reset the SMC every time you press the SYNC button and so SMC need to load again its software from the NAND.
The key point of the SMC reset is be sure that SMC reset has the same software loaded then the NAND version (dashboard version) so all match perfectly and is more difficoult to undestand that console has been modified.
This feature give an issue, when you try to switch to secondary NAND it is empty, so the southbridge cannot load a new software (smc software) and console don't start is complete dead.
To solve this problem we released today a new BITSTREAM of SQUIRT BGA 1.2 that is necessary only on FIRST TIME INSTALLATION!
This bitstream do two simple things:
1- when you turn on the console by default the original nand is selected
2- by pressing SYNC the secondary nand is selected but the SMC is not reset
This allow to access the secondary nand and write / read it to install the patched nand for RGH.
After done the first programming the user can install the regular SQUIRT QSB DUAL NAND firmware (that reset every time the SMC and it starts by defaul secondary nand) and all works perfectly.

This is an easy procedure that avoids to disconnect wires etc previusly explained in the TUTORIAL at page 10bis.

The new bitstream is called "trinity_smc_120824_1916_INSTALL.svf" and is available in support area: SQUIRT 1.2 BLACK BITSTREAM)

I think is more hard to write then do it :)

Thanks for now
SQUIRT TEAM


2012-08-28 17.01.00
SQUIRT NAND PCB 512 MBYTES for PHAT consoles

SQUIRT NAND PCB 512

After many requests finally available in the market the new SQUIRT NAND PCB 512Mbytes ready to be used for DUAL NAND and SQUIRT BGA on PHAT consoles!

Is important to understand some important things on PHAT dual nand:

Like you know if you have a console X360 with dashboard above 14699 you should install RGH2.0 and not RGH1.
Right now aren't availables the DUAL NAND bitstreams for RGH2 because simply xilinx chip is full.
We are working to release the DUAL NAND bitstream working with QSB DUAL NAND PHAT tool, in this case the SYNC button / SMC reset function works perfectly.

The options to install NAND 512 PCB are so two:
1- Install the nand pcb with a phisical switch (CE_B and CE_A switch)
2- Wait the release of QSB DUAL NAND PHAT accessory and the correct bitstream RGH2.0 + QSB DUAL NAND.

Here you can find the diagram how to install SQUIRT BGA + NAND 512 Mbytes with a switch. >> CLICK HERE (added also in diagrams collection)

New tutorial PDF is available here

We remember that SQUIRT NAND PCB can work so also with any RGH modchip! soon we will post links to reviews and videos.

Thanks for now
SQUIRT TEAM


2012-08-08 17.01.00
SQUIRTER PROGRAMMER: CPUKEY NAND RETRIEVAL :)



Dear customers,
squirt team is happy to present a small nice feature of autoGG and squirter programmers. We are able to retrieve the CPU_KEY directly from the NAND of X360 instead use network connection. Really good for the corona where many people has issue to get the CPU_KEY correctly.
The feature is possible with a small modification on XELL RELOADED already available online for all.

in the video we show how autoGG is able to retrive the key after the reading of first 1 Mbyte of the NAND.

The mod will be included in the next autoGG software update.

Thanx to libxenon - xebuild team, theguru, ubber, all squirt beta testers, all squirt fans and all autoGG blakcat fans (again the first to offer nice features to RGH modders)

Thanks for now
SQUIRT TEAM


2012-08-08 17.01.00
SQUIRT QSB DUAL NAND PCB CORONA & BITSREAM "TRINITY"

SQUIRT QSB DUAL NAND CORONA

Dear customers,
here the 3D view of the new QSB DUAL NAND board for CORONA. Same feature of the other two QSB boards "trinity" and "phat".
We remember that the NE555 component on board allow a more easy and secure SMC reset then other source codes available on the net (expecially the boot procedure is much easy and simple, press SYNC and finish) :)

SQUIRT QSB DUAL NAND for CORONA
ETA: first week of sept.
Final user pricelist: 8 EUR / 9.6 USD (discounts for resellers / distributors)

Availables the BITSTREAM to use this board together to the QSB boards HERE
to install the QSB board and understand
Here you can find the updated diagram: HERE
Here you can find the updated tutorial: HERE

Coming tomorrow a new video that show how is easy to manage DUAL NAND with this QSB TOOLS and how the SMC reset works.

Thanks for now
SQUIRT TEAM


2012-07-31 17.01.00
SQUIRT QSB DUAL NAND PCB PHAT & TUTORIAL QSB DUAL NAND BOARD ONLINE

SQUIRT QSB DUAL NAND PHAT

Dear customers,
in the picture you can see the design of the SQUIRT QSB DUAL NAND for PHAT consoles and in few days we will release the QSB BOARD also for CORONA to complete all the collection of boards.
In the same time today we finished the testing of the SQUIRT DUAL NAND for TRINITY and we updated the tutorials for a correct installation of those boards.
Is very important to read page 8tris and 10bis of the tutorial to understand how to program the secondary NAND PCB for the first time.

SQUIRT QSB DUAL NAND for TRINITY is in production
ETA: 10 Days
Final user pricelist: 8 EUR / 9.6 USD (discounts for resellers / distributors)

Here you can find the updated diagram: HERE
Here you can find the updated tutorial: HERE

Coming tomorrow a new video that show how is easy to manage DUAL NAND with this QSB TOOLS and how the SMC reset works.

Thanks for now
SQUIRT TEAM


2012-07-25 10.01.00
SQUIRT QSB DUAL NAND PCB TRINITY- AVAILABLE SOON


SQUIRT 360 CORONA DUAL NAND READY
Dear Customers,

Finally tested and ready for production the SQUIRT QSB DUAL NAND PCB.
Here the specs:

1- Easy and fast quicksolder installation of the secondary NAND xbox pads.
2- E555 IC on board that allow a safe SMC reset during the nand switch. This allow to be super stealth in Xbox live.
3- Compatible PLUG AND PLAY with SQUIRT 16 Mbytes NAND PCB and PROGSKEET 16 Mbytes PCB
4- Built to work with SQUIRT BGA 1.2, the board can also work with any other RGH modchip.
5- In the picture the TRINITY version, soon available also the CORONA.

Remember also that our "modular" solution will allow to save lot of money in stocks, only one RGH chip and all the options extra.. sure better then stock many different ALLINONE chips :)

Video tutorial and PDF manuals will be updated soon.

Thanks for now
SQUIRT TEAM



2012-07-19 21.01.00
SQUIRT DUAL NAND on CORONA READ!


SQUIRT 360 CORONA DUAL NAND READY
Dear Customers,

 

Today we are happy to present to you the DUAL NAND CORONA bitstream!

Here is the official youtube VIDEO:
http://youtu.be/9wYbwWT2Jq0

Here is another video:
http://youtu.be/mK1B48WB_8s

Discuss it in our TECH forum:
http://forum.dayton360mods.com

The new file will be available in the next version of autoGG and also is available in Support area file "SQUIRT 1.2 BGA - RGH 2.0 & CORONA BITSTREAMS".

Please remember here some important points:

- Dashboard 15574 is compatible with DUAL NAND, of course you should get the CPU_KEY "BEFORE" you update. With CPU KEY in your hands you can easily patch the dashboard again and install RGH! So DUAL NAND on Corona is FULLY working.

Many customers like to install original dash with LT3.0 and also RGH dash to play offline. Squirt dual nand is PERFECT solution for that and at a cheap price.

- In the next few days we will present to everyone the new QSB SQUIRT DUAL NAND PCB, this nice cheaper pcb is not only to make installation easy of NAND PCB SQUIRT (just plug the ZIF cable and finis), but also introduce a small cheaper component called E555 that manages a complete SMC reset during the NAND switching.

When there is only one HDD installed the risk to be banned is always present.

For those who install dual nand best to keep a seperate hard drive giving a better chance to remain safe ;) so DUAL NAND is always suggested.

Thanks for now
SQUIRT TEAM



2012-07-10 21.01.00
SQUIRT BGA CORONA CODE NOW IS FREE & VHDL TOO


CORONA FREE SQUIRT 360

Dear Customers,

Today we updated the DIAGRAMS and TUTORIALS:
- added DUAL NAND CORONA diagrams
- added CORONA CPU_RST alternative point

Right now we are testing the SVF file DUAL NAND CORONA on the forum here:
http://forum.dayton360mods.com/showthread.php?228-Squirt-360-dual-nand-corona-version-bitstream-%28beta%29

Check version 1.7 of tutorials in the SUPPORT area.

Thanks for now
SQUIRT TEAM


2012-07-04 22.01.00
SQUIRT BGA CORONA CODE NOW IS FREE & VHDL TOO


CORONA FREE SQUIRT 360

Dear customers,

All SQUIRT USERS will be able to install RGH CORONA TODAY without any CRAP 'DIY hacking' installation like explained from team Xecuter on their forum .
We already tested their solution and put an OSCILLATOR on the fly is all then STABLE.

But this is not ALL, together with the SVF file compiled you will find the VHDL FILE that allow ALL to setup own timing and develop new versions of RGH hack with better performances.

SQUIRT BGA 1.2 is the best solution to be able to glitch CORONA, thanks to our hardware design that include an oscillator since the beginning!

Last thing. What happen with the people that already bought a SQUIRT PRE PROGRAMMED?
We will compensate them with extra squirt chips, more infos will be sent to our customers.

Here the specs:
http://www.360squirt.com/images/SQUIRT-BGA-CORONA.jpg

Here the RGH FILES:
http://www.360squirt.com/downloads/rgh2-corona-squirtbga060712.zip


2012-07-04 22.01.00
SOME INFOS AND INSTALLATION CPU_RST SUGGESTIONS


Dear customers, here we want to clarify some points:

First here some infos and SQUIRT CORONA picture:
http://www.360squirt.com/images/SQUIRT-BGA-CORONA.jpg

1- Why squirt corona svf file is not available for download?
In the scene there two type of developers, people that works on RGH like hobby for the glory and also companies like TX and SQUIRT that invest and risk time, money and resource to get out something working.
Both are important for the hacking scene and both can work together to improve the hacking...
Are over 6 months that two our employes are working on that and we invested lot of money without know if we never reach the target and without know if we never be the first.
The 5 eur extra in distribution that we ask to our customers for the PRE PROGRAMMED SQURIT CORONA are addressed only to compensate this work, expecially because RGH is an hack easy to be reversed (our svf file is Write Protect and so impossible to be read) .
In a market where RESELLERS sell chips 5 times what is the distribution price, where INSTALLERS gain over 60 eur for an RGH installation is funny that many hypocrites complaint about this!
Our answer is simple: Do you want CORONA modded NOW? buy SQUIRT CORONA... do you want all for free? wait the evolution of scene in the next weeks.

2- Do you will release the SVF file in the future?

We will release the SVF file the day after we see in the market a stable RGH code and an a cheaper hardware able to play it (with oscillator on board).
is possible that this happen tomorrow, or in 1 month, sure who pay us now for PRE PROGRAMMED version is able to modify the consoles of their customers NOW without wait the scene.

3- I have SQUIRT BGA in hands, what can I do now with them?
Be smart, you have in hands a CORONA COMPATIBLE chip, the day after the SVF file will be released in the next weeks you can program them for free and enjoy CORONA hack... with a stable and good chip tested from many many customers.

4- Do I need a SQUIRT PROGRAMMER to do FREEBOOT on CORONA?
Like you know the only tool able to compile a FREEBOOT nand right now is autoGG. This tool is based on SQUIRTER and NANDPRO tool.
Nandpro right now is not able to write the CORONA NAND... this mean that right now to be sure you can flash correctly the NAND of X360 you need the SQUIRT PROGRAMMER (2x more faster than NAND X and same features)

We close this news with a picture of 3 possible routing of the CPU_RST wire showed in the TUTORIAL.
Option 1 and 2 are two alternatives, if one don't work so much good, try the other.
The Option 3 is a momentary solution using TX QSB POST BUS PCB, soon SQUIRT TEAM will release a nice CAP&QSB board for that.
Don't miss to post in our forum all the feedbacks etc.

SQUIRT 360 ROUTING CORONA CPURST



2012-07-04 22.01.00
SQUIRT 360 DEFEAT CORONA 16 Mbytes


SQUIRT 360 RGH CORONA

we are happy to announce today that SQUIRT 360 BGA DEFEAD CORONA 16 Mbytes.
All now can enjoy FREEBOOT on X360 CORONA 16 Mbyte nand, please look on this video

http://www.youtube.com/watch?v=HCQekAMgZu8

.. a special thanks to BLAKCAT - AUTOGG creator for the XELL and FREEBOOT, Uber, all beta testers, theguru e of course GLIGLI, the team xebuild that allow all this possible...

New tutorial for installation here:
http://www.360squirt.com/downloads/SQUIRT-TUTORIAL-EN.pdf

New SQUIRTER 0.7b version that support 16Mbyte Nand SPI here:
http://www.360squirt.com/downloads/SQUIRT-SOFTWARE-030712.rar

Soon available the autoGG version 0.6RC able to do the XELL and FREEBOOT patching here:
http://autogg.nexxzus.com/autogg/AutoGG%200.4.rar
SQUIRT FORUM where discuss your installation is here:
http://forum.dayton360mods.com/forumdisplay.php?22-360-Squirt-Tech-Support
WHERE TO BUY :
http://www.360squirt.com/where_to_buy.php

right now only http://www.hardstore.com/default.asp?cmd=getProd&cmdID=53211&idC=3601&pType=-1&l=2   has stock ready to ship

The SQUIRT BGA 1.2 PRE PROGRAMMED with the RGH CORONA are available but stock is limited, don’t miss the chance to be the first to offer a CORONA RGH solution!



2012-06-19 22.01.00
UPDATED THE MANUALS WITH AUTOGG SUPPORT


The partnership between AUTOGG and SQUIRT TEAM is more stronger, new updates improve the AUTOGG integration with SQUIRT PROGRAMMER and today we are happy to post the TUTORIALS 1.5 version that include all infos to use SQUIRT TOOLS with AUTOGG!

Here the direct link to download it:
CLICK HERE FOR DOWNLOAD

Available also here the first PROOF OF CONCEPT RGH 2.0 svf file from BLAKCAT:
Download here


2012-06-07 15.01.00
AUTOGG OFFICIAL SUPPORT SQUIRT CHIPS!


AUTOGG tool (one of the best GUI to manage a complete RGH patching in the scene) now support SQUIRT COOL RUNNER family, including our SQUIRT PROGRAMMER !
With few clicks all will be able to program SQUIRT BGA with correct firmware and with few step mores all will be able to READ/PATCH/WRITE the nands of X360 with the SQUIRT PROGRAMMER!

Here the direct link to download it:
DIRECT DOWNLOAD

Here a nice video that show the new SQUIRT support:



2012-05-25 15.01.00
SQUIRT GRAPHICS INTERFACE FOR NAND & COOL RUNNER PROGRAMMING!


SQUIRT 360 GUI INTERFACE

Soon available a nice GUI interface to manage the programming of any SQUIRT COOL RUNNER chip and X360 NAND in one click!
Of course we remember that SQUIRT PROGRAMMER is able also to work with any other COOL RUNNER CHIP so you can easy program TX cool runner, Stinger etc.
SQUIRT PROGRAMMER is one of the fast solution in the market and able to work with any kind of XILINX device.

Many customers asked us if is possible to program SQUIRT BGA with NANDX or NAND PRO...
The answer is NO, just because these device don't support XILINX BGA package.
But the solution is simple...
1- if you don't want to change your programmer just use the LPT printer port to program the SQUIRT, we remember that squirt is the only one with ON BOARD circuit for LPT
2- Buy squirt programmer and sell your old programmer... you pay SQUIRT PROGRAMMER half then competitors, is DOUBLE time faster and support all NAND and COOL RUNNER CHIPS... now with GUI it has nothing to envy from comptetitors!

Here we remember the PINOUT for SPI NAND and JTAG connection of SQUIRT PROGRAMMER:
http://www.360squirt.com/diagrams/SQUIRT-PROGRAMMER-PINOUT.jpg

And in the diagrams collection you can easy find the diagram for LPT printer port programming:
http://www.360squirt.com/diagrams/SQUIRT_DIAGRAMS_100412.rar


2012-05-25 15.01.00
SQUIRT NEW BIT STREAM DUAL BOOT "ALWAYS ON"


ALWAYSON BITSTREAM SQUIRT 360

After many requests from our customers and fans we released today a new BITSTREAM DUAL BOOT that has RGH patching "ALWAYS ON"
This version allow to install DEV DASH and FREE BOOT DASH on same machine and switch between them.

A video showing the the BITSTREAM at work is online here
http://youtu.be/pggkhgMT8UI

In the SUPPORT AREA there is online the updated BITSTREAM package here


2012-05-08 15.01.00
SQUIRT MAY 2012 NEWS!!


SQUIRT BGA RGH 2.0 IS HERE

In this news many important infos:

  1. SQUIRTER DONGLE device “preview” (MAGICDONGLE hardware)
  2. RGH 2.0 STORY ...
  3. SQUIRT SUPPORT FORUM
  4. SQUIRT DUAL NAND technical notes

- SQUIRTER DONGLE device "preview"
Squirt team like to present you an advanced device that will reach the market and we hope will give lot of fun to users and developers.
In this video we like to show our new project under develop, a nice portable small dongle, big like a keychain.
Here the preview video: http://youtu.be/gpfXWF8t1BI
Here technical specs: squirter-dongle-specs.txt
Of course the dongle will be full integrated with squirt chips but if can also works with any RGH solution ACTEL or XILINX or other IC (is full updatable from us and community)
- RGH 2.0 STORY
Here there is the technical explanation how we reached RGH 2.0 glitch. >> rgh2-tech.txt
One of our external coder that take care on builder used informations got from a TX beta tester to speed up the code writting. He didn't tell us this thing and so finally we got a code that in some parts was copied from TX original builder.
Add also the mistake that we called RGH 2.0 our code... we gave all points to attack us in a easy way :( even if we did the most of work ...
First we want to apologize TX for this situation.
This don't affect our skill, that honestly has nothing to envy to TX or other teams.
The correct competition is GOOD for the MARKET and USERS!! So support squirt team and be careful from forum and people that attack us only because we can be a good alternative.
- SQUIRT SUPPORT FORUM
Finally squirt team has an official support forum for all our fans !
ENGLISH official forum at this link: http://forum.dayton360mods.com/forumdisplay.php?20-360-Squirt-Forum
FRENCH official forum at this link: http://www.xavboxforum.com/index.php/forum/220-360squirt/
- SQUIRT DUAL BOOT technical note
Is the XILINX dual nand code unsafe because of the lack of SMC reset?
Answer: No. The executed SMC code cannot be read by LIVE and hence, this cannot be a reason for a flag on LIVE. However, we STRONGLY discourage the use of using it on LIVE because there are MANY other reasons to get banned (among which lies that you might be using Freestyle dash or similar dashboards which will leave traces on either the internal or external memory device).
The SMC reset brings absolutely NO advantage.
Right now we can easy say that SQUIRT BGA 1.2 + SQUIRT 16 Mbytes NAND pcb is the only solution available in the market for SOFTWARE DUAL BOOT and sure one of the competitive solutions also for the future! (software we mean a DUAL BOOT complete managed by our bitstreams, no phisical switchs or other things)
If you are a shop and you like to stock some SQUIRT and be present on our reseller / distributors page contact us HERE


2012-04-15 19.01.00
RGH 2.0 BITSTREAMS & USER MANUAL ONLINE!


SQUIRT BGA RGH 2.0 IS HERE

Available now online in SUPPORT AREA:
- SQUIRT RGH 2.0 Bitstreams
- SQUIRT RGH 2.0 user manual and diagrams

Features:
- Hack now works on new CB's (14717/14719 update)
- Hack now works with all Refurbished Split CB's (4577, 5772, 6752)
- Zephyr CB 4577, 4575
- Falcon/Opus CB 5772, 5773
- Jasper CB 6752, 6753

We are at work to implement PLL_BYPASS and also to release asap the DUAL NAND RGH 2.0 firmwares!

Honestly, today we make you squirt... the happiness is unbelievable!


2012-04-12 19.01.00
RGH2.0 IS COMING ON SQUIRT BGA & POST BUS SNIFFER

SQUIRT RGH2.0
After 4 weeks of work we are finally close to the release of a new generation of RGH bitstream. This is called RGH 2.0.
(Screenshot and our video posted in SQUIRT YOUTUBE is very clear!)
The current method of RGH 2.0 is based on trinity, so it is not as stable.
However, believe us, we are busy on getting it working using PLL_BYPASS (which is well known to be ultra stable).
This nice news is also that RGH 2.0 is working on the current Squirt BGA hardware.

Today we are giving you Opus and Xenon for Squirt BGA (of which the other teams would not release the source code, so we had to find it ourselves. For Opus: 1608, for  Xenon: 1641)

RGH 2.0 first version will be online FOR FREE during this weekend

Regarding the post bus sniffer, we are close to releasing the BGA aswell as the green bitstream. This nice tool will allow you to see where your glitch went wrong using the serial port.
You can have your personal POST BUS SNIFFER with nothing more then a squirt chip and programmer ...

Available now online in SUPPORT AREA:
- New Bitstream OPUS and XENON for BGA SQUIRT
- Preview of POST BUS SNIFFER manuals and diagrams

Stay tuned.


2012-04-10 17.01.00
New MANUALS in ENGLISH and ITALIAN language online


New cool USERS MANAULS right now in ITALIAN and ENGLISH version are now availables in support area!
This time we did a great work, clear and complete, please download them and let us know feebacks by contact form!

Available now online in SUPPORT AREA


2012-04-03 17.01.00
New bitstream FAT - Light control nand selection

LIGHT LED
Online tomorrow these improves in the BITSTREAMS:
- FAT "allinone" bitstreams: Optimized and now full tested.
The new BITSTREAM works with pad SLIM bridged even if the installation of RGH is on a FAT console! IMPORTANT! (we need the Slim voltage configuraton)
After many tests of new bitstreams we found that a better and stable config is reached with 220pF pad enabled.
For DUALNAND installation please note:
Because the power to overwrite the southbridge of xilinx seams not sufficient, only on FAT consoles we suggest to CUT the track of southbridge to allow a correct nand selection.
- Light control: The new DUAL NAND bitstreams are able now to show the nand selection with the LED on the CHIP and also on the POWER BUTTON LED of the console.
"When the SYNC button is pressed in standby, the chip will switch to primary nand and the led will light up. To go back to secondary nand, turn the console on and off again."
Right now the bitstream compatibles are only for FAT, we are working to fit the code in the low space available on SLIM bitstream!
Available tomorrow online in SUPPORT AREA


2012-04-03 17.01.00
BANNER SQUIRT ONLINE

For all our customers there are online now the SQUIRT BANNER COLLECTIONS, in GIF and SWF files, the link to download them is here CLICK HERE